Product introduction:

AMMT-016 Polyurea special primer is one thin coating primer composed of isocyanate prepolymer, curing agent, environment friendly solvent. Fast drying speed, Can effectively seal the concrete substrate. Improve the adhesion of polyurea material on the concrete surface.

Features:

●Excellent adhesion

●Good matching

●Low dosage

Application:

Primarily used as a primer for polyurea materials, to achieve a good adhesion of polyurea material. At the same time can be used for special primer to polyurea material steel substrate.

Main performance index:

Colour: Light brown                  Mass solid content: ≥35%

Mixing ratio: A:B=1:1(mass)           Specific density: approximately 0.95Kg/L

Drying schedule: wet film thickness 90 microns, relative humidity: 50%

Construction description

Construction condition:

Coating substrate temperature: Minimum 5℃maximum of 45℃

Relative humidity below 90%, the substrate surface temperature above the dew point temperature above 3 degrees, temperature and humidity should be measured near the substrate.

Outdoor painting is not allowed in rainy, snowy, foggy or strongly windy days

Construction method: Using single spraying equipment or brush coating

Spraying pressure and nozzle size may be adjusted according to appropriate requirements of painting performance.

Tool cleaning: Methyl ethyl ketone

Surface treatment: After the concrete be completely dryd (newly prepared concrete should be cured for 28 days), the surface should be sanding or shot blasted to remove loose impurities on the surface. Old concrete is used to repair the holes and cracks with putty.

Compatibility:

Next-process compatibility:spray polyurea material

Packaging specifications:

A: 10L iron barrel, B: 20L iron barrel

Compatibility: Spray Polyurea Material.

Storage:

The product shall be stored in cool, dry and ventilated warehouse and away from heat or fire source. The packaging container shall be kept sealed, and the storage period is: A component: 6 months; B component: 3 months.

Safety:

No fire source is allowed on the paint mixing and construction sites where the ventilation shall be satisfactory. The paint construction personnel must wear protective devices to avoid skin exposure. When the paint is splashed on skin, wash with proper cleaning agent or water-soap solution immediately and seek medical advice.

Statement:

1. All data in this manual are theoretical or obtained from the accumulated experience and may change with the improvement of this product, so please ask for the latest version timely.

2. When the technical personnel of our company are not on site, our company is only responsible for the quality of the coating material product itself.

3. The protective effect of any coating material relies on painting and construction to a large extent and various construction factors, including surface treatment and paint film thickness will directly affect the service life of the coating. When using the product, users shall ensure compliance with the construction conditions.